Repairs to uPVC Windows
uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.
Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.
1. Broken Glass
If the glass in your window is damaged, it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.
For single pane windows it is relatively easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However If windows with double panes are held in place by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this case you'll need to source some plastic spacers that assist the new pane to fit perfectly into the window frame.
Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass, so that any shards will fall onto the cloth rather than on the floor, where they could be trampled upon and cause further damage.
It's a good idea to seal the gap after the glass is removed. This will stop drafts and water from entering your home until a professional arrives to fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you might think about a security door that has an integrated window, as this will offer the best of both worlds.
2. Sagging
uPVC is durable, energy-efficient and affordable alternative to timber sash windows. In time, they could be affected by a variety of issues such as sliding. A sagging window in uPVC could cause issues with light, draughts and even security. It is crucial to act as soon as you realize that your uPVC windows are sliding.
Repositioning the hinges can aid in fixing a window that is sliding. You'll first need to open the windows to get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the size of the window, tighten the screws to hold them in place.
If you are unable to move the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.
uPVC handles could also become loose. This is usually due to screws that have been removed over time, but it can also be caused by the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need close your window and do an experiment to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can use get more info a screwdriver to loosen the handle and then reverse the mechanism back into its original position.
3. Water Leaks
If you awake to wet floors and mouldy walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.
This is a fairly simple fix that can be done by any competent DIYer. Depending on how serious the issue is, old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs here you should not be tempted to 'over-caulk' as this will only make the area harder to clean and could decrease the efficiency of your energy usage.
Verify that the drainage holes have no debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you may have to replace the window.
Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.
If the leakage is occurring between the double-glazed window, it is more likely that the problem is with the seal than the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or slack and open with ease get more info it could be hinges that are at the fault. Any competent DIYer can replace hinges in just a few minutes.
Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they can wear down over time. It is very easy to change a window hinge, but it's simpler if you have someone to help hold the frame.
Make sure that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.
Window hinges that aren't working here properly can be caused by incorrectly opening the window in a particular manner or because of poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to give advice.
Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.
5. Draughts
Draughts can be caused by a variety of different factors. Firstly the hinges, again because of wear and tear, may become displaced, which will cause gaps to develop between the sash double glazed window repairs and the frame. This can be easily repaired by giving them good clean, but if they are beyond repair it may be necessary to have them aligned or replaced. The interlock may be disaligned. It is located on the hinge's side, and could require to be cleaned. In some cases it is possible to replace the hinges.
The next most common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time and let air escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also lessen the possibility of draughts.
Lastly, one of the most effective ways to cut down on draughts is by using an draught excluder. These are typically made of fabric which are filled with a type of filler. They can be positioned on the windowsill on top. They will help block out cold air and keep your home warm and cosy!
With a little maintenance and repairs your windows made of upvc will provide excellent insulation and security for your home. It is essential to remember that all windows eventually get worn out and it may be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your Upvc window you should consult an expert as soon as possible.